2011年8月26日

Comparison between Traditional Garden Spray Nozzle

  • To choose a right garden spray nozzle to what you need. We are over 10 years experiences  on produce garden nozzle with our own plastic injection factory.

  • Low cost also brings over low price of the nozzle. Wide range of the garden nozzle for chosen either 5 spray patterns or 7 spray patterns, such as shower/jet/mist/soaker/cone/flat/vertical.




Convenient Garden PVC hose

Are you looking for the most common & useful  garden PVC hose w/nozzle set in the market?

Yi Zuo offers the most competitive price to the market, and sold a huge quantity to European countries. If you’re also looking for such kind of products, please contact us now. E-mail: kanz@ms54.hinet.net  skype: kanz.tw  


 Content :
1pce PVC 15 meter hose
1pce Plastic hose nozzle  #P-377 (multi-function spray patterns) 
                                                  or  #P-383      (adjustable nozzle)
                                or  #PC-20-1   (twist nozzle)
1pce Plastic Connector without STOP
1pce Plastic Connector with STOP
1pce 1” tap adaptor
1pce 1” to 3/4” reducer
1pce 3/4” male tap adaptor


2011年8月14日

Innovated Water Volume Timer

~Watering your life wisely~

Control the water irrigation by "accurate water volume"...... no more time period setting.

For example :
Watering one time a day (CYCLE TIME : 24 hrs)
If : TIME    6:00
     START 7:00
     Water Flow Volume 10 Lit.    <Unit for U.S. is Gallon ; for Europe is Liter>
     MIST CYCLE 30 %
     CYCLE TIME 1 DAY

Watering will begin at 7:00
Duration of watering time will be executed as :  <because mist cycle is 30%>
   Waters 3 Lit/Gal, stop for 10min
   Waters 3 Lit/Gal, stop for 10min
   Waters 3 Lit/Gal, stop for 10min
   Waters 1 Lit/Gal, then stop

<Total spend 30mins for STOP and watering times for 10 Lit./Gal.>

The next START TIME will be renewed as 7:00 (7:00 + 24hrs) on the following day. So, CYCLE TIME : 1 DAY means watering one time a day.

So, build-in programmed CYCLE TIME is 1 hour which calculated by programmer automatically.
However, if CYCLE TIME set as 1 HR, which means that the START is sequentially shown 7:00, 8:00, 9:00, 10:00……….. Which, also means watering 1 time per hour and repeats.

Under such situation “CYCYLE TIME set up 1HR”, if watering time plus stop period longer than 1hour totally, the next START time till be delayed 1hour automatically.

Basing on such rule, watering more than 1 time a day is shown as following table :

Number of watering times          CYCLE TIME to be set
                  1                                              1 DAY
                  2                                             12 HR
                  3                                               8 HR
                  4                                               6 HR
                  6                                               4 HR
                  8                                               3 HR
                 12                                              2 HR
                 24                                              1 HR




Further details of manual instruction, please contact us by e-mail: kanz@ms54.hinet.net  (skype: kanz.tw )  or browse website www.kanz.com.tw



Smart garden hose nozzle - finger press trigger to change the 6 patterns


The most interesting hose nozzles to make the watering job fun......

The most convenient way to change the 6 watering patterns.....


Only one hand to hold nozzle & change pattern by fingers pressed.
A ergonomic trigger design w/convenient On/Off button.

*European threading or U.S. threading system are as option.
*Custom logo on body are welcomed.
*Colors assorted as option
*OEM & ODM service






2011年8月12日

Gardening faucet connector

Dear Home gardening lover, do you ever have problem to choose the faucet connector for the watering system?


As we know, threading faucet is very common is Europe and America area where people could thread the tap adapter directly to the faucet and connect to the hose. 
To the people in America, it's easier for them to just thread the threading connector of coil hose directly to the faucet. 


However for people live in Asia or other place, the faucet is usually without threading. If you want to introduce the quick connector system to the gardening, it's necessary to add the special device like universal connector that could allow the users for every quick connect device. Here is the simple demonstration:






No matter your Gardening Faucet is with or without threading, you could always find the proper faucet connector for your gardening to connect with the garden hose, sprinkler system and other water device you use to make your life better. 










Check all the possibility on Kanz website: www.kanz.com.tw


It's easy to send the inquiry through the on-line system

2011年8月9日

Water timer makes your hanging plants live well

Hanging plants are a challenge to water, especially if they are high or scattered across the garden and patio. To save yourself the trouble of having to lug buckets and watering cans or drag long stretches of garden hose to keep your hanging plants hydrated, consider installing an automatic watering system that will take care of the chore for you. The one-time installation will make sure all your hard-to-reach plants are regularly and adequately watered without fail. 


It's not difficult to set up!


Go with Yi Zuo's professional water timer








~Things You'll Need~



Measuring tape
Backflow preventer
1" Polyethylene tubing
1/4" Polyethylene micro tubing
Drip irrigation connectors
Hose connectors and end cap
Emitters
Twist ties


~Step by Step~

1
Sketch the layout of the watering system. Draw the locations of the hanging plants relative to the water source.

2
Measure the distance between the water source and the farthest hanging plant to determine how long your main line (the 1-inch poly tubing) should be. Measure the heights of the hanging plants to determine the total length of the feeder lines (the 1/4-inch poly micro tubing) you will need. Depending on the locations of the plants, tap one feeder line to the main line and use it to water one hanging basket or branch out one feeder line to water several hanging plants at once.

3
Assemble the water system. Lay out the main line, attach the micro tubing lines to the main line, attach connectors to the micro tubing if branching out, then attach the emitters to the ends of the micro tubing. Attach hose connectors and end cap to the main line as needed.

4
Secure micro tubing feeder lines to the hanging baskets. Gravity and water pressure will eventually dislodge the emitters and micro tubing from the hanging baskets; twist ties will keep the tubing in place.

5
Connect the irrigation system to the water source. Attach the backflow preventer to the main line to ensure that water from the irrigation system does not flow back into the tap. Connect the water timer to the faucet to control the delivery of the water. Then attach the backflow preventer to the timer.

6
Test the water system. Turn the water on and check all the connectors and junctions for any leaks. Check the emitters for proper placement and effective watering, and take note if the water pressure is sufficient.

7
Set the timer. Choose the frequency and duration of the watering; the schedule should be adequate for all the hanging plants.

8
Check the water system regularly for clogged emitters, leaks and other maintenance issues.

Read more: How to Build a Water System for Hanging Plants | eHow.com http://www.ehow.com/how_5833858_build-water-system-hanging-plants.html#ixzz1UWYtIWhC


2011年8月7日

Yi Zuo Garden Hose


Yi Zuo is a reputed garden hose supplier in Taiwan. We supplied a wide selection from light duty garden hoses to heavy duty industrial hoses commonly used by professional contractors with competitive price and top quality. And don't forget our specialty hoses, like soakers and sprinklers as well! Yi Zuo was founded in 1988, as a professional manufacturer of garden hose. Our garden hose are manufactured in high quality and directly exported to worldwide 60% Europe and 30% U.S. We are dedicated to providing safe designs, humanity, convenience, compatibility and environmental protection garden hose to commit all our valued customers's requirements.

For the garden hose that meets your specific need, choose an image below and click on it; a new window will open to show you a larger image plus specific product information. Here we show some of our samples of garden hoses, hope you can find the one which you are interested in. Yi Zuo is always welcome to answer any questions about our products, please feel free to send an inquiry form to us!

Garden Hose Series:


50Ft EVA recoil Garden Hoses25Ft EVA recoil Garden Hoses


Save Water with Water Timers


Here, I refer one good article and really glad to share to all of you. 
Water timers allow you to water your garden following a schedule even if you are not manually using the hose. Using these timers will give you more time on other things rather than standing on your garden with a hose on your hand.
How it works
These water timers are often powered by batteries where in you will set it on a particular time of the day. It will then water your plants the same time each day for a certain period of time. There are those who connect the water timer to a soaker hose. Soaker hose is a stationary device that waters the same area of your garden.
Maintenance for water timers
Since water timers are made of plastic it gets worn out eventually especially when it gets exposed to different types of weather. When the plastic cracks or when it appears like it’s almost going to break, you have to replace the device. The batteries used to power it also need to be replaced as necessary.
Advantage
When your automatic watering system is attached to a water timer, you no longer have to worry about forgetting to water your plants, can ensure that your plants get the right amount of water or having to have it done while you are away or at work.

Disadvantage
If water timers are not installed properly it can come off and can leave the water running. Good if you notice it right away but if you are away from your home for a vacation, you will be surprised with the huge bill you will be receiving. So, if you are using a water timer, make sure that all other items attached to it, such as the hose, is working properly to avoid experiencing problems with your garden irrigation system.
The article is refer to :http://www.watertimer.org/tag/water-timer 

2011年8月2日

Beat the summer heat with the “personal mister pack”…

When the temperature rises outdoors, reach for this handy personal water mister. Ideal for sunbathers, gardeners, barbecues, pets and plants, the Cool Shot Personal Mister provides a gentle, cooling water vapor. The personal water mister features a dual nozzle design for easy use.
The nozzle inlet on the personal mister has a special filter screen that generates the micron-sized mist droplets.
As the mist evaporates, it will leave you feeling cooler and refreshed.


2011年7月27日

The benefits of DRIP IRRIGATION


Drip irrigation is the most efficient method of irrigating. While sprinkler systems are around 75-85% efficient, drip systems typically are 90% or higher. What that means is much less wasted water! For this reason drip is the preferred method of irrigation in the desert regions of the United States.

The benefits of drip irrigation:
- It is useful almost anywhere.
- Easy to install.
- Easy to design.
- It can be very inexpensive.
- It can reduce disease problems associated with high levels of moisture on some plants.

Drip irrigation (sometimes called trickle irrigation) works by applying water slowly, directly to the soil, bloop, bleep, bloop, bleep. The high efficiency of drip irrigation results from two primary factors. 
-1st: The water soaks into the soil before it can evaporate or run off.
-2nd: The water is only applied where it is needed, (at the plant's roots) rather than sprayed everywhere. While drip systems are simple and pretty forgiving of errors in design and installation. 




Satisfy your irrigation need by one device


We know different plant has different requirement for water demand. For instance, to take care the lawn and the flower nursery, you need to be aware of the different needs. You may need to water the lawn by sprinkler every morning to keep them green but no need to water too much for the flower bed especially when it is in the green house.

Therefore you need at least two water timer to help you for the watering tasks. But do you really need to buy two? Now there is the innovated water timer which combines two water timer into one. The 2-outlet timer is controlled by independent programmer which could set the water programmer for 2 zones. A great helper, isn’t it!


Take a look at Water Timer, WT-098 from Yi Zuo




Some Easy Steps for Setting:

1.    Attach the water timer on the faucet.
2.    Decide Zone 1 & Zone 2, take off the panel from the timer and put one new 9V battery.
3.    Set the run time and frequency for both zone 1 & zone 2. Attach the panel on the timer.
4.    Turn on the faucet, zone 1 & zone 2 will start to water according to the settings.

Benefit:
Save the cost.

The users could take care two different areas which may require different watering pattern by one water timer. Of course one water timer is less expensive than two timers.

The programmer is independent, that is WT-098 could be treated as two water timers but in one body.

2011年7月20日

Why to choose a high quality solenoid-valve water timer?

Reason 1 :
If the water pressure in your area is higher than 8 bars (116PSI), the mechanical water timer maybe not suitable to install on tap. Because the ball valve inside of mechanical water timer which drive ON/OFF is by a motor & gears. It’s not powerful enough to work at high water pressure.

Reason 2 :
In case, you need a long lifetime & durable water timer for your garden irrigation. You must choose the solenoid valve timer. It’s driven by copper wire coil & metal piston, performance over 10,000 times ON/OFF functional inspection by Yi Zuo (KANZ) company.

Hereby would recommend you one of the most welcomed solenoid valve water timer as below :

Model : SW-128(EUROPE) / SW-127(U.S.) Water Timer


Advantages :
1. Rotary knob for easy setting up
2. 12 sections frequency & run time to set it up in seconds.
3. Delay run time function design.
4. Very competitive price
5. Swivel nut for easy connection.
6. Running water pressure: 10~145 PSI
7. Operating temperature: 5~50°C
8. Batteries: one 9V alkaline battery that can last up to one year.
9. Tap/Faucet connector : 1" or 3/4"
10. Hose connector : 3/4" equipped
11. Manual on/off : allowed

How to keep the garden sprinkler in good performance

Irrigating a home garden or lawn is a time-consuming job, it’s also exhausted your energy to care of every corner. Installing a sprinkler system will cut down the time you spend with a watering can in hand. Sprinkler systems run manually or on a timer that turns the sprinkler on and off at set times throughout the day. Clogs and garden activity can damage sprinklers. Troubleshooting properly prevents the need to rip up irrigation lines or scrap the entire system.



For the Above-Ground Sprinkler, here are some steps for you to check the sprinkler when it does not perform well.

1
Check the arm of the sprinkler to see if it is moving. Clean off any dirt or debris that may inhibit its movement. If it's broken, replace the sprinkler unit.

2
Inspect the hose for any leaks if puddles form in the yard or when the pressure of the water coming from the sprinkler is weak. Patch leaks with a hose patch kit.

3
Check the hose for any kinked areas, which may prevent water from coming through, and rearrange the hose if you find any.

4
Poke a pin through individual holes on the sprinkler to remove dirt if some holes are not spraying water.

Reminder
Inspect the sprinkler system at the beginning of the irrigation season for signs parts may be broken. Check for sprinklers sitting high out of the ground, tilted at an angle or those with broken plastic pieces.

Always inspect the position of sprinklers before mowing to prevent damage to the heads.


How To Install a Simple Drip Irrigation System

Drip irrigation doesn't just save water (and the money you pay for that water), it also saves time.


Here's How:
1.      Start with a small drip irrigation project: A vegetable garden laid out in rows or Shrubs around your house foundation can be watered efficiently with drip irrigation.

2.      Determine a water source: Any outdoor faucet can be used for an automatic drip irrigation system, provided you attach a Y-shaped valve hose connector as our PC-17 PLASTIC HOSE CONNECTOR WITH DUAL SHUT-OFF.
            Put it on upside down, so that the bottom of the "Y" attaches to the faucet. Attach one arm to the garden hose that will deliver water to the drip irrigation system. The other arm can be attached to an auxiliary garden hose for other watering needs.
3.    Start measuring: Draw a garden plan, showing the plants you want to water and how far apart they are. How much of hose length you need for your garden, you can also attach soaker hose for your little plant. Please see attached picture as our explanation.
         
     
4.    Gather your gear: You'll need a battery-operated timer for your drip irrigation system, which can be set like a clock to automate watering times. A pressure regulator / backflow valve is essential to prevent the drip irrigation water from backing up and ruining your household plumbing. Hose adaptors help, as do optional items such as a filter to keep rust and dirt out of the drip irrigation line and a fertilizer injector. Here attached are the pictures of attaching a WT-067 water timer with your garden tap, then to connect with PC-17 or PC-17 Hose Connector with Dual shut-off, then attached 3/4" or 1/2" Hose connector to connect hose or soaker hose as the figures as below:
   
    
5.   Assemble the drip irrigation lines first: Lay the hoses out in the sun to soften the plastic, so it's easier to work with. Cut the 1/4" hoses with scissors, and push the ends into the connectors to extend the lines toward your plants.
     
     
6.      Connect the flow from the faucet: Connect the remaining equipment from the tap in this order: Y-connector, timer, how connector, hose-thread adaptor, garden hose, soaker hose, sprinkler, and drip irrigation line. Your water supply is now linked to your drip irrigation system line. There are options of equipment for you to connect with, in accordance with your requirement. Please see the example as below figure:
     
7.      Test the drip irrigation system: Toggle the switch on the Y-shaped connector so water will run from the tap to your drip irrigation system. Set the timer on manual, and then set it to On. Turn on the tap. If you've done this correctly, you'll see the sprinkler start to spout like water dance. The other side of soaker hose will be properly drip water out to water your little lovely plant.
8.      Check for leaks: When you're satisfied with the water flow, turn the timer off but leave the tap turned on. You should hear the water stop running. This is the time to ensure there are no leaks between the tap and the other equipment. If there is leakage, you are probably using the wrong adaptor -–
9.      Set your automatic drip irrigation timer: Twenty minutes once a day is usually enough. Experiment with different amounts of watering time until you’re satisfied your plants are receiving adequate moisture.
 


Smart Digital Trigger Nozzle for your life

Being smart is all the rage nowadays. Maybe you have a smart phone, but do you have smart water for your yard. You can with the smart digital trigger nozzle. It connects easily to your hose and monitors water usage for your required needs. You can control how much water your delicate plants get, or how much water you need to add to your pond, and most importantly it lets you know how much water you're using, which prevents a nasty little surprise when the water bill arrives. The digital trigger nozzle also provides 4 different spray patterns, allowing you to ensure the water you use gets used in the right way.

Features:
Ø          Sprayer with 4 precision spray patterns: soaker, shower, cone & flat.
Ø          Equipped with a built-in meter to measure the volume of water usage.
Ø          Helps user be more conscious of the water they are using & promote water conservation.
Ø          Measuring meter takes the guesswork out of delivering the right amount of water to plants.
Ø          Ideal for watering pond - lets user know exactly how much water they are adding with chemicals & helps keep fish healthy & pond clear.

2011年7月13日

The water timer which could reduce your bill and save your money!

Water timers are wonderful time saving inventions that can be purchased for as little as forty dollars or less. 

They enable you to set a predetermined schedule for a sprinkler to come on or to feed soaker hoses.

Plants thrive best when they are watered regularly. What causes shock to many bedding plants is too much cycling of dry and wet soil.

A water timer keeps you beds the same moisture all of the time, allowing roots to grow deeper, reducing water use.

You may want to start off at one time setting and gradually reduce it over the coming weeks as the soil loads up with moisture.

Keep the water timer out of direct sun or place some kind of shade over it since direct sunlight can shorten the life of the plastic housing and the batteries as well.

And …..
Battery irrigation timers are the most popular method for automatic watering, due to their easy programming and their reliability.

Check out our VOLUME WATER TIMER OF WF-8LCD.
-The power starts with 9V battery.  
-Special and different from other water timers is, if you have specific idea about how much water you want to use 
 only per day for watering your lawn or garden, the water timer has the options of 1~999 Liter/Gallon you can
 choose to set up. And from Mon ~ Sun whenever the day you need to water….
  
For example:
Watering one time a day (CYCLE TIME : 24 hrs)
If : TIME               6:00
   START              7:00
   Water Flow Volume    10 Lit (or Gal)     <for U.S. is Gal. / for Europe is Gal.>
   MIST CYCLE        30 %
      CYCLE TIME        1 DAY
   Watering will begin at 7:00
   Duration of watering time will be executed as :
       Waters 3 Lit/Gal, stop for 10min
       Waters 3 Lit/Gal, stop for 10min
       Waters 3 Lit/Gal, stop for 10min
       Waters 1 Lit/Gal, then stop

   <Total spend 30mins for STOP and watering times for 10 Lit./Gal.>
   The next START TIME will be renewed as 7:00 (7:00 + 24hrs) on the following day. So, CYCLE TIME : 1 DAY means watering one time a day.
   So, build-in programmed CYCLE TIME is 1 hour which calculated by programmer automatically.
   However, if CYCLE TIME set as 1 HR, which means that the START is sequentially shown 7:00, 8:00,
 9:00, 10:00……….. Which, also means watering 1 time per hour and repeats.
 Under such situation “CYCYLE TIME set up 1HR”, if watering time plus stop period longer than 1hour totally, the next START time till be delayed 1hour automatically.

 Basing on such rule, watering more than 1 time a day is shown as following table :

 Number of watering times           CYCLE TIME to be set    
1                          1 DAY
2                          12 HR
3                           8 HR
4                           6 HR
6                           4 HR
8                           3 HR
12                           2 HR
24                           1 HR